Rite Lok Adhesives And Sealants
View PDF | Print View
by: MarcusRonan
Total views: 1
Word Count: 491
RW Greeff are a UK based supplier of industrial consumables. They are partnered with a number of large companies such as 3M, Dow Corning and are a division of Univar. A product range of over 8,000 products shows the diversity and reach of RW Greeff as a supplier.
Due to being the top United Kingdom technical partner of 3M, the RITE-LOK is the latest product to be added to the product range of RW Greeff. From providing advanced process solutions, to general everyday use, the product range is suitable for many purposes.
1. Anaerobic Adhesives - Very high performance, single component engineering adhesives that cure in the absence of air and in the presence of metal parts. Anaerobic adhesives are available in a wide range of strengths and viscosities. The products are separated into application categories and include threadlocking, gasket making, retaining and pipe sealants.
2. Cyanoacrylate Adhesives - High specification single component adhesives that cure based on traces of moisture found on surfaces. Commonly referred to as superglues, cyanoarcrylates bond on a variety of substrates including metals, plastics, rubbers, wood and ceramics.
The range of products under the Cyanoacrylate category are made to adhere to exact bonding requirements. These are requirements such as low odour, metal bonding, rubber toughened, super fast curing and high temperature resistant.
3. Ultra Violet light curing - These adhesives are high performance and made up of a single component. Manufactured to cure when in the presence of UV lighting and to cure within seconds. Also they leave no visible bond line and are proven to form a very strong bond. A number of materials can be bonded using this adhesive, materials such as plastic, glass and metals. But there must be at least 1 surface that allows the penetration of ultra violet lighting.
UV curling adhesives come in a number of various viscosities and their curling properties allow them to be used in a number of applications. Standard everyday uses are the bonding of electronic potting, medical profession devices as well as the bonding of glass furniture.
4. High Temperature Sealants and Structural Adhesives - These provide a variety of applications which are very product specific and therefore are ideal solutions to work with the current range of 3M structural adhesives catalogue.
Silver loaded epoxy adhesive is made to create electronically conductive bonds which makes them well suited to a number of electrical and electronic purposes. 2 part epoxy putty is good for MRO applications for example the urgent repair of piping and castings. SA30 is a no-mix acrylic adhesive which is made up of two parts and can offer a handling strength in around ninety seconds. It can also be used on many plastics. The perfectly suited use for this is the signage market. It is also possible to get silicone sealants which are able to bond up to two hundred and sixty degrees C.
About the Author
The greatest benefit about the vast variety of RITE-LOK industrial adhesives is that they cover a number of different applications and uses. There are also many other industrial lubricants available at RW Greeff who are located in the United Kingdom.
HTML For Publishers
Please note: This article is free to reprint but all links must remain active.
Rating: Not yet rated
